Sprinkler Head Types
There are a number of different types of sprinkler heads that meet different needs. This article covers the operation types (fusible link vs. bulb), the distribution types (pendant, upright, sidewall), and response temperatures.
Fusible Link Sprinklers vs. Glass Bulb Sprinklers
All wet-pipe sprinklers are held closed by either a fusible link or a glass bulb that contains a heat-sensitive liquid.
A fusible link sprinkler head has a two-part metal element that is fused by a heat-sensitive alloy. The link holds the pip cap, or plug, in place. Once the ambient temperature around the sprinkler head reaches a specified temperature, the alloy releases and the metal elements separate, which causes the pip cap to fall away. Water is then released. Note that water is only released by sprinkler heads where the ambient temperature reaches a specified level - therefore, water is only released in the area of a fire, which helps limit water damage.
Glass bulb sprinkler heads have a small glass reservoir that holds a heat-sensitive liquid. This glass bulb holds the pip cap in place. When the ambient temperature of the liquid reaches a certain level, the liquid expands causing the glass bulb to break, which allows the pip cap to fall away releasing water. As with the fusible link heads, water is only released where the ambient temperature reaches a certain level, which helps limit water damage.
Since ambient air temperatures can vary widely depending on the use of a space or surrounding environment, sprinklers come rated for different activation temperatures. The table below is based on NFPA 13 table 3-2.5.1 (US National Fire Code); however, manufacturers may have sprinklers with different temperature ratings.
|Glass Bulb Color||Fusible Link Color|
|Ordinary||100°F||135°F - 170°F||Orange (135°F)
|black; no color|
|Intermediate||150°F||175°F - 225°F||Yellow (175°F)
|Extra High||300°F||325°F - 375°F||Purple||Red|
|Very Extra High||375°F||400°F - 475°F||Black||Green|
|Ultra High||475°F||500°F - 575°F||Black||Orange|
Sprinkler Head Distribution Types
The following diagrams show the different types of sprinkler heads and their distribution patterns. Refer to manufacturer information for coverage radii.
|Pendant sprinkler heads hang down from the ceiling and spray water in a circle pattern.|
|Concealed pendant sprinkler heads are recessed in a ceiling and are covered with a decorative cap. The cap will fall away about 20°F prior to activation of the sprinkler. Once the sprinkler reaches its rated activation temperature, the head will drop below the ceiling. The water pattern of concealed sprinkler heads is a circle.|
|Upright sprinkler heads project up into a space. They are generally used in mechanical rooms or other inaccessible areas to provide better coverage between obstructions. They also provide a circle spray pattern|
|Side wall sprinkler heads stand out from a wall. They provide a half-circle spray pattern. A second deflector also sprays water back toward the wall so that the wall is protected. These are used when sprinklers cannot be located in the ceiling.|
Related Articles on archtoolbox.com
We have a few other things that you might find useful
Display and/or use of the information contained within this site constitutes acceptance of the Terms of Service